Tag Archives: Franklin Park

2012 Elma Lewis Playhouse in the Park.

It had been a bit of a rush to put the new battery bank and inverter system together.

With no time to add solar panels for the much larger system, a plan “B” was going to be needed for recharging the new battery bank.

Christine from the Franklin Park Coalition came to the rescue!

She made a couple of phone calls and a place was found in the Franklin Park Zoo maintenance yard where the battery boxes could be parked between shows to plug into the grid and recharge each week. Not exactly solar powered … But we would not be needing a generator for the series!

Everything was ready … Well at least everything seemed ready …

The morning of July 10, 2012 started off nicely … sunny and warm.

A local community group had agreed to provide the sound system for the morning events and everything was sounding great … But when a third self powered speaker for the stage was added, it buzzed … a lot.

The poor stage monitor was not even close to happy.

After checking the cables to see if a bad connection was causing the noise,  running a power cord to the new battery / inverter system to see if that might help … and watching the clock tick as show time got closer and closer … I pulled an amp and speaker from my truck, set them up and turned them on … The silence was golden!

Something about that self powered speaker did not like the battery / inverter power.

The rest of the morning show went smoothly, with the smaller solar powered system running for a little over two hours, using .23 kWh of power  (according to the “kill a watt” meter), with the inverter’s battery meter still showing “full”!

And … aside from the buzz … a success!

The evening show, with one of my sound systems, started out fine.

I had hired Clara Rhee to mix the show so I could keep an eye on the battery systems for their “shake down cruise”. No hums or buzzes showed up in the sound system or on any of the band’s gear,  but the battery powered LED lights that had been rented for the series were not going to be able to compete with the evening sun as it set.

As the concert progressed the meters on the 1,250 watt inverter powering the PA started to blink yellow on some of the louder parts. … The meters on the 2,000 watt inverter powering the stage seemed fine …. So I warned Clara, and in between songs (with fingers and toes crossed) I unplugged the amplifier powering the six stage monitors from the smaller rig and plugged it into the larger rig …

No sparks, smoke or buzzes … or blinking yellow lights.

I don’t think anyone noticed … though someone may have wondered what the huge sigh of relief coming from back stage was for!

Did I mention that batteries are very heavy!

The two battery / inverter systems used to power the 2012 Elma Lewis Playhouse in the Park concert series. The smaller system was recharged each week using two 120 watt solar panels.

The concert ended as scheduled … 3 hours and forty five minutes after we had turned everything on for sound check … Using a total of 3.49 kWh of power between the two systems …. Most of that coming from the smaller system powering the PA.

My assumptions about how much power would be needed for the PA and the stage were way off base … But nothing that could not be fixed by just swapping power sources and loads … The morning’s buzz had me a little more concerned … It looked like I would be visiting the electronic supply store again in the morning!

The morning after …

After Town Day I was very excited about how well the gear had worked …if only I could explain how it could have worked … The numbers I had been using just did not add up.

Something was certainly up … I just had no idea what.

The few e-mails I sent out telling folks about the “experiment” were met with a mixture of curiosity, rolled eyes and one set of “raised eyebrows”.

The “raised eyebrows” belonged to Richard Wood of Wooden Kiwi Productions.

Richard had been hiring me to bring in sound for events around Boston … And he was curious if I thought the battery system could power the sound system for an upcoming event with the Boston Pops Brass Ensemble in Franklin Park.

A great question to add to the others running around in my head.

I was still trying to figure out how two 120 watt solar panels captured enough electricity to run a 1,500 watt sound system for seven hours in just four days … And never mind about where the three batteries “hid” all that power?

My brain was starting to hurt!

Another trip to the electronics supply store supplied a “Kill-A-Watt” meter … an afternoon in the shop experimenting with sound equipment, a couple of cups of coffee, some scratch paper and things were beginning to look like they were making sense … or so I thought!

Most of the gear behaved as I thought it would. Turn it on and it would use about the number of watts listed for it, typically a little less, but pretty close … the exception being the amplifiers. A 1,500 watt amplifier only used about 10% of that when I turned it on. Playing a CD through the amplifier did not seem to have much of an effect on the power consumption … At least until it was turned up to the point where it started to get pretty loud. But even then it seemed to use a lot less power than the advertised 1,500 watts. Even overloading the amplifier would not draw that much power.

I did notice that the readings on the “Kill -A-Watt meter” jumped around a lot with the music on the CD … Hmmmm …

“Armed” with this new information and a calculator I started adding things up for the concert with the Pops Brass Ensemble. Using what I figured would be the average current draw for the sound check and concert … Multiplying that total by the number of hours needed for the sound check and concert … An added safety margin … and It looked like another three batteries would do the trick.

Being me, I bought four!

The person who had asked Richard to bring in the sound system for the event was very excited about using a solar powered sound system and I gave her a “tour” of the power system … She asked when was I going to turn it on … catching me a bit off guard … it was on!

The concert went off without a hitch!

Enjoying the sounds of the Boston Pops Brass Ensemble in beautiful Franklin Park, 6/24/2012

Enjoying the sounds of the Boston Pops Brass Ensemble in beautiful Franklin Park, 6/24/2012

I had all the gear running through the “kill-a-watt” meter during the event and was starting to get a better feel for just how much power was being used …

A lot less than I had expected.

In the mean time I was not the only person getting excited about the project.

Christine Poff from the Franklin Park Coalition was thinking even bigger things.

The Elma Lewis Playhouse in the Park concert series was looking at ways to stay within their budget. The folks from Wooden Kiwi had been brought in a number of years earlier to help with the same challenge … Save money … and keep the concerts going.

It was that time again.

After doing some math it turned out that using a battery system for the Tuesday night concerts was going to be less expensive than hiring a diesel generator for the event. (Gasoline powered generators are not allowed in Boston).

Fifteen very long days and nights later, with a lot of help from my dad, 1,700 amp hours of batteries, 3,250 watts of pulse wave inverters, the wonderful help I received from Fred and Mary at Boats and Motors, too many cups of coffee to count … And …

Show time!

The E Water Band performing, Elma Lewis Playhouse in the Park 7/10/2012

The E Water Band performing, Elma Lewis Playhouse in the Park 7/10/2012

The E Water Band taking the the new battery rig out for a “spin”

 

Franklin Park, 7/10/2012

Franklin Park, 7/10/2012